Planmeca ProMax 3D Plus - Switching X-ray system on; 5.1 Switching X-ray unit on; 5.2 Switching 3 D reconstruction PC on

5 Switching X-ray system on
NOTE
To prolong the lifetime of your X-ray system, always switch the X-ray system
off when it is not in active use.
5.1 Switching X-ray unit on
The on / off switch is located on the underside of the column top.
5.2 Switching 3D reconstruction PC on
The on / off switch is located at the top of the computer.
5 Switching X-ray system on
8 Planmeca ProMax User's manual