11 Settings
NOTE
Some of the settings can be used to alter the operation of the X-ray unit.
Never use functions that you are not familiar with.
NOTE
The contents of the displays depend on the unit configuration. The displays
shown here are only examples.
Select the settings symbol on the main screen to enter the settings menu.
Settings that can be entered by the user:
• User
• Program
• About
Settings that can be entered by service personnel only (password required):
• Technical
To return to the main screen, select the settings symbol at the top left
corner.
11 Settings
70 Planmeca ProMax User's manual
To Next Page
Loading...
