Planmeca ProX Service Manual

04/2020
www.planmeca.com
Maintenance guide
Planmeca imaging units
Table of Contents
Planmeca ProX™ intraoral X-ray unit ...................................................................................... 2
Surfaces ......................................................................................................................................................... 2
Planmeca ProSensor® HD intraoral sensor............................................................................. 3
Sensor and cable ........................................................................................................................................... 3
Sensor control box ......................................................................................................................................... 3
Planmeca ProScanner® 2.0 imaging plate scanner ................................................................ 4
Imaging plate scanner .................................................................................................................................... 4
Imaging plates ................................................................................................................................................ 4
Light protection covers ................................................................................................................................... 4
Cartridges ....................................................................................................................................................... 5
Imaging plate storage box .............................................................................................................................. 5
Planmeca ProMax® and Planmeca Viso™ extraoral X-ray units ............................................. 6
X-ray unit patient supports, handles and touch screens ................................................................................ 6
Other surfaces of X-ray units ......................................................................................................................... 6
Please note that country-specific directives, standards and specifications for medical
products must always be considered, as well as specifications for dental practices and
clinics.
30025473_1

Planmeca ProX Specifications

General

Type	Intraoral X-ray
Tube current	7 mA
Imaging Technology	Digital
Focal spot	0.4 mm
X-ray generator	High-frequency
Power Requirements	100–240 V AC, 50/60 Hz
Tube voltage	60-70 kV

Summary

Planmeca ProX intraoral X-ray unit

Surfaces

Procedures and approved agents for cleaning and disinfecting the surfaces of the Planmeca ProX intraoral X-ray unit.

Planmeca ProSensor HD intraoral sensor

Sensor and cable

Guidelines for cleaning, disinfecting, and handling the Planmeca ProSensor HD sensor and its cable, including what to avoid.

Sensor control box

Instructions for cleaning the sensor control box using a soft cloth, and a note against disinfection.

Planmeca ProScanner 2.0 imaging plate scanner

Imaging plate scanner

Procedures for cleaning and disinfecting the Planmeca ProScanner 2.0 imaging plate scanner using approved agents.

Imaging plates

Guidance on cleaning imaging plates with specific wipes, avoiding immersion and steam sterilization to prevent damage.

Light protection covers

Instructions for disinfecting light protection covers before and after placement, and allowing them to dry.

Planmeca ProMax and Planmeca Viso extraoral X-ray units

X-ray unit patient supports, handles and touch screens

Procedures for cleaning patient supports, handles, and touch screens after each patient, including autoclaving options.

Other surfaces of X-ray units

Guidelines for regular wiping of other surfaces using approved disinfectants and cleaning agents for maintenance.