Need help?Do you have a question about the Planmeca Compact i Classic v2 and is the answer not in the manual?
General| Brand | Planmeca |
|---|---|
| Model | Compact i Classic v2 |
| Category | Dental equipment |
| Language | English |
Covers the hands-on user training provided during installation of the device.
Instructions on how to register your Planmeca product online to activate the warranty.
Details on the importance of annual checks and servicing by qualified technicians.
Explanation of various symbols found on the product labels and their meanings.
Essential warnings and cautions for safe operation and maintenance of the dental unit.
Describes the function of safety switches that activate during patient chair movement.
Methods to quickly stop patient chair movements in case of emergency.
Overview of different configurations, including delivery arm types.
Details on the unit configuration with balanced instrument arms.
Details on the unit configuration with hanging-tube instruments.
Identification and description of detachable components of the dental unit.
Identifies parts of the unit that come into contact with the patient.
Information on the dental unit's bowl, its removal, and cleaning.
Details about the monitor and its movement.
Instructions for attaching and using a tablet with the holder.
Information on USB ports for charging and connecting devices like cameras.
Details on the specific USB ports located on the cuspidor.
Description of quick-connectors for external devices.
Information on mounting and using the Planmeca ProX X-ray unit.
Instructions for placing and connecting the intraoral scanner.
Description of the dental unit's delivery arms.
Details on the OP delivery arm and its safe usage.
Overview of the instrument console, including types and instrument placement.
Specifics for the instrument console with balanced arms.
Specifics for the instrument console with hanging-tube instruments.
Instructions for connecting and disconnecting quick-connector hoses.
Details on programmable functions for various dental instruments.
Programming and control of instrument spray settings.
Configuration and operation of the automatic chip blow feature.
Settings and control for the instrument light.
How to reverse the rotation direction of the micromotor.
Enabling and using the quickstart function for air-driven instruments.
Setting the RPM limit for micromotors.
Setting the torque limit for micromotors.
Information on different types of tray tables available.
Details on the quick-connect tray table attachment and usage.
Information on the integrated tray table for OP-deliveries.
Details about the top tray table for OP-deliveries and mobile carts.
Description of different types of suction arms.
Details on the standard adjustable suction arm.
Information on the adjustable suction arm equipped with a Flexy-holder.
Description of the left/right suction arm with Flexy-holder.
Details on the chair-mounted adjustable suction arm with Flexy-holder.
Information on the chair-mounted left/right suction arm with Flexy-holder.
Overview of the Flexy-holder, its functions and control panels.
Step-by-step guide for removing and replacing suction tubes.
Explanation of the sensor that recognizes patient presence.
Operation and locking mechanism of the automatic legrest.
Procedure for positioning the patient chair in Trendelenburg.
Details on moving, locking, and replacing armrests.
Adjustments for the manual headrest.
How to adjust the headrest height manually.
Procedure for adjusting the angle of the headrest.
Repositioning the headrest for specific patient needs.
Description of the control panel on the instrument console.
Overview of the control panel located on the Flexy-holder.
Basic introduction to the integrated foot control.
Comparison and differences between standard and wide foot control pedals.
Detailed functions of center knob, side knobs, and pedals.
Specific functions controlled by the center knob.
Configurable functions for the left and right side knobs.
Default and instrument-specific functions of the foot control pedals.
Procedure for signing into the dental unit using a PlanID card.
Steps for signing out from the dental unit.
Detailed instructions for manual control of chair movements.
Overview of storing and selecting automatic chair positions.
General information on automatic chair position storage and selection.
How to select preprogrammed automatic chair positions.
Procedure to move the chair to the rinsing position.
Methods to stop chair movements before reaching a programmed position.
Instructions for operating the bowl rinse function.
How to operate the cup fill function and related settings.
Activating door opening or assistant call functions.
Overview of the operating light and its features.
Explanation of the meaning of different indicator light colors.
Methods to turn the operating light on and off.
How to activate/deactivate the composite mode of the operating light.
Procedure to adjust the intensity of the operating light.
Adjusting light intensity specifically for composite mode.
How to change the color temperature of the operating light.
Explanation of the dental unit's instrument logic and operation.
Details on micromotor speed, power, and reverse rotation.
How to control the speed and power of the micromotor.
Instructions for reversing the micromotor's rotation direction.
Selecting and controlling the spray settings for micromotors.
Activating the momentary spray function for micromotors.
Operation and programming of automatic chip blow for micromotors.
How to temporarily activate manual chip blow.
Control and settings for the instrument light on micromotors.
Additional features of the Bien-Air MCX micromotor.
Setting and understanding the torque limit for micromotors.
Setting and understanding the RPM limit for micromotors.
Details on turbine speed, power, quickstart, and spray.
How to control the speed and power of the turbine.
Enabling and using the quickstart function for turbines.
Selecting and controlling the spray settings for turbines.
Activating the momentary spray function for turbines.
Operation and programming of automatic chip blow for turbines.
How to temporarily activate manual chip blow for turbines.
Control and settings for the instrument light on turbines.
Details on scaler speed, power, spray, and modes.
How to control the speed and power of the scaler.
Setting and controlling the instrument spray for the scaler.
Activating the momentary spray function for scalers.
Explanation of the different operating modes for the LM scaler.
Explanation of the operating modes for the EMS No Pain scaler.
Control and settings for the instrument light on scalers.
Operation and safety measures for the polymerisation light.
Using the intraoral camera with Planmeca Romexis software.
Starting and operating the camera when placed in the console.
Starting and operating the camera when placed in the suction holder.
Operating the intraoral scanner via the dental unit's foot control.
Functions controllable by foot control for the intraoral scanner.
Operation of saliva and high-volume suction handpieces.
How to use and temporarily stop the tilting high-volume suction.
General steps and notes for programming unit settings.
Programming automatic chair positions.
Steps to store chair positions in the traditional view.
Adjusting instrument settings like spray and chip blow.
Programming flow rates for instrument spray.
Programming flow rates for automatic chip blow.
Programming the intensity and on/off state of instrument lights.
Programming the cycle duration for the polymerisation light.
Adjusting flow rates and durations for bowl rinse and cup fill.
How to adjust the flow rates for cup fill and bowl rinse.
Programming the duration for the bowl rinsing cycle.
Programming the duration for the cup filling cycle.
Programming settings for the operating lights.
Programming the intensity of the operating light.
Programming the white light tone of the operating light.
Programming the maximum brightness of the operating light.
Programming the duration for door open and assistant call functions.
Recommended intervals for running flushing and cleaning programs.
Preparation steps before starting flushing and cleaning procedures.
Procedure for short instrument flushing after each patient.
Procedure for long instrument flushing (morning and end of day).
Procedure for cleaning the suction system.
Detailed steps for cleaning the suction system using OroCup.
Procedures for weekly cleaning of the suction system.
Weekly cleaning procedures to be performed during the workday.
Weekly cleaning procedures to be performed after the workday.
Instructions for disassembling and cleaning suction handpieces.
General guidelines and approved disinfectants for the dental unit.
Table detailing cleaning methods for various dental unit surfaces.
Instructions for cleaning and servicing dental instruments.
Procedures for cleaning the cuspidor and its bowl.
How to clean and remove the cuspidor bowl for washing.
Information on the instrument flushing holder and its disinfection.
Procedure for cleaning the clean-water bottle.
Daily cleaning procedures for the suction system.
Morning cleaning steps for the suction system.
Cleaning steps for the suction system after each patient.
Daily cleaning steps for the suction system at the end of the day.
Explanation of the Clean Water System and its components.
Weekly procedure for cleaning waterlines with disinfectant.
Steps for waterline cleaning at the end of the working day.
Steps for completing waterline cleaning in the morning.
Maintenance tasks for units with a wet suction system.
Maintenance tasks for units with VS/A compatible suction systems.
Procedures for emptying and cleaning the oil collector.
Maintenance of the oil collector for balanced instrument arms.
Maintenance of the oil collector for hanging-tube instruments.
Types of messages displayed by the dental unit.
List of short help messages and their explanations.
Categorized list of error messages and their troubleshooting actions.
Common error codes and their explanations.
Error codes related to power supply and fuses.
Error codes related to the control panel functionality.
Error codes specific to dental instruments.
Error codes related to the instrument multiplexer system.
Error codes related to the suction holder system.
Error codes related to the foot control operation.
Error codes associated with the operating light.
Error codes related to the separator system.
Error codes related to patient chair movements and functions.
Error codes related to the main CPU and software.
Error codes concerning headrest operation and sensors.
Error codes indicating a water leak detected.
Error codes related to overdue maintenance.
Error codes encountered during software upgrades.
Error codes specific to the control panel display and data.
List of suction handpieces, their order numbers, and materials.
Details on sterile water hoses, including order number and material.
List of parts for infection control, with order numbers and materials.
Silicone mats for tray tables, available in different sizes.
Adapter for Luzzani Minibright syringe.
Details on the Dürr amalgam collector.
Information about Dürr OroCup cleaner.
Foot covers for different upholstery types.
List of disinfectants, their order numbers, and contents.
Detailed technical specifications including dimensions, weight, and environmental conditions.
Information on the dental unit's power consumption.
Details on the electrical classification of the unit.
Information on intermittent operation of chair motors.
Pressure, flow rate, quality, and connection for water supply.
Pressure, flow rate, and quality for air supply.
Electrical classification of dental instruments.
Information on dimensions and patient area layout.
Example positioning for patient, dentist, and assistant during treatment.
Defines the patient area and safety precautions within it.
Dimensional data for the OP delivery with balanced arms.
Dimensional data for the OP delivery with hanging tubes.
Water consumption rates for various unit parts.
Declaration of conformity for radio equipment type PlanID™.
Declaration of conformity for PlanID RFID-reader.
FCC compliance information for the PlanID RFID-reader.
Industry Canada compliance statement for the device.
French version of Industry Canada compliance statement.
Information regarding RF exposure limits and separation distances.
To Next Page
