Planmeca Compact i Classic v2 User Manual

27.3.4 Instrument related error messages
Instrument related error messages
ERROR
CODE
EXPLANATION
E23 Polymerisation light bulb has blown or is not properly attached
to socket.
E23.1 Instrument overtemperature error.
Check the instrument handpiece and let the instrument cool
down.
E23.2 Micromotor error; phase missing.
Check that the micromotor and hose are connected properly.
E23.3 Instrument undervoltage error.
E23.4 Instrument power protection error.
E23.5 Instrument EEPROM error.
E23.6 Instrument overvoltage error.
E23.7 Instrument data communication error.
E23.8 Apex locator / Morita micromotor PCB failure.
E23.9 Unable to save instrument settings to selected preset.
E25 Satelec mini LED polymerisation light requires newer IMUX
PCB version.
27.3.5 Instrument multiplexer related error messages
Instrument multiplexer related error messages
ERROR
CODE
EXPLANATION
E28.1 Reference resistor signal out of bounds when unit is switched
on.
E28.2 Active instrument signal out of bounds.
Error in hose identifcation system in IMUX. Ensure that the
instrument's quick connector is properly attached.
E28.3 Syringe signal out of bounds.
Error in hose identifcation system in IMUX. Ensure that the
instrument's quick connector is properly attached.
E28.4 Reference resistor signal out of bounds when instrument is
activated.
Ensure that the instrument's quick connector is properly
attached.
E28.5 Syringe signal changes during use (blinking).
Error in hose identifcation system in IMUX. Ensure that the
instrument's quick connector is properly attached.
27 Help and error messages
154 Planmeca Compact i User's manual

Planmeca Compact i Classic v2 Specifications

General

Brand	Planmeca
Model	Compact i Classic v2
Category	Dental equipment
Language	English