12 Patient chair
CAUTION
Make sure no one sits on the legrest or the backrest.
NOTE
The patient chair can be equipped with a fixed or an automatic legrest.
NOTE
Dark coloured clothes may cause coloured stains on the bright coloured
upholstery.
12.1 Patient recognition
A sensor in the patient chair recognises if there is a patient in the chair and
forwards information about this to Planmeca Romexis Clinic Management
software.
12.2 Automatic legrest
The automatic legrest can be moved synchronously to the movements of the
backrest, that is, when you drive the backrest down, the automatic legrest is
driven up. Use the chair movement buttons to drive the patient chair. Notice
that the lever underneath the legrest has to be unlocked (moved to the right)
in order to move the legrest with the backrest. Support the legrest with your
other hand when locking or unlocking the lever.
1. Automatic legrest
2. Lever
12 Patient chair
44 Planmeca Compact i User's manual
To Next Page
Loading...
