The remaining time or the text ‘LED’ is displayed on the control panel.
5. Press Program.
22.4 Bowl rinse and cup fill
22.4.1 Adjusting cup fill and bowl rinse flow rates
The flow rates of the bowl flush and cup fill can be adjusted with the two
black knobs located inside the dental unit.
1. Adjustment knob for bowl flush
2. Adjustment knob for cup fill
When you have adjusted the flow rates, you might need to adjust the
duration of the bowl rinse and cup fill. For instructions, see sections
"Duration of bowl rinsing" on page 101 and "Duration of cup filling" on page
102.
22.4.2 Duration of bowl rinsing
Steps
1. Press Program.
2. Press Cup fill / bowl rinse.
22 Programming
User's manual Planmeca Compact i 101