Planmeca Compact i Classic v2 User Manual

The operating light intensity can also be programmed, see section
"Planmeca Solanna and Planmeca Solanna Vision operating lights" on page
103.
From operating light
From one handle
Press and hold the handle button on either handle to adjust the intensity of
the operating light. The intensity increases/decreases for as long as you
press the button.
Hands-free with sensor
Once the operation light is lit, keep your hand longer in front of the sensor to
adjust the intensity of the light.
NOTE
If the operating light is installed to another manufacturer’s dental unit, the
intensity adjustment can be done only from the operating light.
From dental unit
NOTE
The dental unit can be configured so that the operating light's intensity in the
composite mode can be adjusted when you press and hold the Flexy button.
Contact your Planmeca dealer.
19 Operating dental unit
74 Planmeca Compact i User's manual

Planmeca Compact i Classic v2 Specifications

General

Brand	Planmeca
Model	Compact i Classic v2
Category	Dental equipment
Language	English