Need help?Do you have a question about the Planmeca ProScanner 2.0 and is the answer not in the manual?
Explains the manual's role and the consequences of non-compliance with its instructions.
Defines signal words and their meanings for warnings, cautions, and notes.
Lists and explains symbols used in the document and on the unit.
States copyright protection and rules for reproduction without authorization.
Outlines residual risks associated with unit operation, such as personal injury from misuse or electrical voltage.
Specifies the unit's exclusive use in dental applications for scanning and processing image data.
Details proper usage, cleaning, and approved accessories for the unit.
Defines improper usage scenarios and states the manufacturer's liability.
General safety rules for unit operation and manual accessibility.
Specifies requirements for unit operators and maintenance personnel.
Covers electrical safety regulations, including EMC considerations.
States compliance with EMC standards, not specific performance characteristics per IEC 60601-1.
Emphasizes using only manufacturer-approved parts and accessories.
Provides guidelines for safe transport and handling of the unit.
Instructs on proper disposal of the unit and image plates according to regulations.
Offers recommendations for securing the unit from cyber threats.
Provides a visual overview of the unit and its components.
Lists items included in the product package, with potential variations.
Lists required items for device operation.
Lists optional items that can be used with the unit.
Lists materials consumed during operation that need reordering.
Identifies wear parts and replacement items for the unit and cartridges.
Presents detailed technical specifications for the unit.
Details electrical and general technical data for the scanner.
Details classification and ambient conditions for image plates.
Provides classification for the light protection cover.
Indicates the location of the type plate on the device.
States device conformity to EU guidelines.
Lists contact details for the distributor and manufacturer.
Introduces operational procedures for the unit.
Describes the function and parts of the scanner.
Identifies unit controls and status LED messages.
Shows the location of the unit's connections.
Explains cartridge usage and size indication.
Describes the image plate, its sides, and handling precautions.
Outlines prerequisites for installing the unit.
Specifies requirements for the installation room environment.
Directs users to find system requirements online.
Specifies monitor requirements for digital X-ray imaging.
Introduces installation procedures.
Covers general safety and setup for the unit.
Explains how to set up the unit as a tabletop device.
Details the process of mounting the unit on a wall.
Covers safety and connection procedures for power.
Provides safety guidelines for electrical connections.
Details how to connect the unit to the power supply.
Introduces network connection procedures.
Explains reasons for connecting the unit to a network.
Discusses safety considerations when connecting multiple devices.
Provides instructions for connecting the network cable.
Introduces the commissioning process.
Details various options for network configuration.
Lists network protocols and ports used by the unit.
Explains unit configuration using the Planmeca Device Tool.
Provides recommended X-ray unit settings for image capturing.
Outlines procedures for acceptance testing of the X-ray system.
Explains proper image plate usage, including warnings and cautions.
Introduces operational procedures for the unit.
Details how to change cartridges for different image plate sizes.
Explains the process of capturing X-ray images.
Guides on starting the scanner and software for data scanning.
Explains when and how to erase image data from the plate.
Provides instructions for safely switching off the unit.
Introduces cleaning and disinfection procedures for the unit.
Details cleaning and disinfection of the scanner unit surfaces.
Provides cleaning and disinfection guidelines for cartridges.
Explains how to clean and disinfect the light protection cover.
Details cleaning procedures for image plates, with warnings.
Covers cleaning and disinfection of the storage box and tray.
Introduces the maintenance section.
Provides a schedule for recommended maintenance tasks.
Offers advice for troubleshooting common issues.
Addresses issues causing poor or missing X-ray images.
Lists common software faults and their probable causes and solutions.
Lists common unit faults and their probable causes and solutions.
Provides information on scanning times for image plates.
Lists uncompressed file sizes for different image plate formats.
Lists contact details for the distributor and manufacturer.
Provides a template for a device handover protocol.
Explains the manual's role and the consequences of non-compliance with its instructions.
Defines signal words and their meanings for warnings, cautions, and notes.
Lists and explains symbols used in the document and on the unit.
States copyright protection and rules for reproduction without authorization.
Outlines residual risks associated with unit operation, such as personal injury from misuse or electrical voltage.
Specifies the unit's exclusive use in dental applications for scanning and processing image data.
Details proper usage, cleaning, and approved accessories for the unit.
Defines improper usage scenarios and states the manufacturer's liability.
General safety rules for unit operation and manual accessibility.
Specifies requirements for unit operators and maintenance personnel.
Covers electrical safety regulations, including EMC considerations.
States compliance with EMC standards, not specific performance characteristics per IEC 60601-1.
Emphasizes using only manufacturer-approved parts and accessories.
Provides guidelines for safe transport and handling of the unit.
Instructs on proper disposal of the unit and image plates according to regulations.
Offers recommendations for securing the unit from cyber threats.
Provides a visual overview of the unit and its components.
Lists items included in the product package, with potential variations.
Lists required items for device operation.
Lists optional items that can be used with the unit.
Lists materials consumed during operation that need reordering.
Identifies wear parts and replacement items for the unit and cartridges.
Presents detailed technical specifications for the unit.
Details electrical and general technical data for the scanner.
Details classification and ambient conditions for image plates.
Provides classification for the light protection cover.
Indicates the location of the type plate on the device.
States device conformity to EU guidelines.
Lists contact details for the distributor and manufacturer.
Introduces operational procedures for the unit.
Describes the function and parts of the scanner.
Identifies unit controls and status LED messages.
Shows the location of the unit's connections.
Explains cartridge usage and size indication.
Describes the image plate, its sides, and handling precautions.
Outlines prerequisites for installing the unit.
Specifies requirements for the installation room environment.
Directs users to find system requirements online.
Specifies monitor requirements for digital X-ray imaging.
Introduces installation procedures.
Covers general safety and setup for the unit.
Explains how to set up the unit as a tabletop device.
Details the process of mounting the unit on a wall.
Covers safety and connection procedures for power.
Provides safety guidelines for electrical connections.
Details how to connect the unit to the power supply.
Introduces network connection procedures.
Explains reasons for connecting the unit to a network.
Discusses safety considerations when connecting multiple devices.
Provides instructions for connecting the network cable.
Introduces the commissioning process.
Details various options for network configuration.
Lists network protocols and ports used by the unit.
Explains unit configuration using the Planmeca Device Tool.
Provides recommended X-ray unit settings for image capturing.
Outlines procedures for acceptance testing of the X-ray system.
Explains proper image plate usage, including warnings and cautions.
Introduces operational procedures for the unit.
Details how to change cartridges for different image plate sizes.
Explains the process of capturing X-ray images.
Guides on starting the scanner and software for data scanning.
Explains when and how to erase image data from the plate.
Provides instructions for safely switching off the unit.
Introduces cleaning and disinfection procedures for the unit.
Details cleaning and disinfection of the scanner unit surfaces.
Provides cleaning and disinfection guidelines for cartridges.
Explains how to clean and disinfect the light protection cover.
Details cleaning procedures for image plates, with warnings.
Covers cleaning and disinfection of the storage box and tray.
Introduces the maintenance section.
Provides a schedule for recommended maintenance tasks.
Offers advice for troubleshooting common issues.
Addresses issues causing poor or missing X-ray images.
Lists common software faults and their probable causes and solutions.
Lists common unit faults and their probable causes and solutions.
Provides information on scanning times for image plates.
Lists uncompressed file sizes for different image plate formats.
Lists contact details for the distributor and manufacturer.
Provides a template for a device handover protocol.
General| Brand | Planmeca |
|---|---|
| Model | ProScanner 2.0 |
| Category | Dental equipment |
| Language | English |
To Next Page