Planmeca ProScanner 2.0 - Wear Parts and Replacement Parts; Technical Data; Image Plate Scanner

2.1.5 Wear parts and replacement parts
Cartridges
• Cartridge for Image Plate Size 0
• Cartridge for Image Plate Size 1
• Cartridge for Image Plate Size 2
Image plates
For more information on the image plates, see section "Accessories" on
page 9.
For more information on wear parts and replacement parts, contact your
local distributor through www.planmeca.com.
2.2 Technical data
2.2.1 Image plate scanner
Electrical data for the unit
Rated voltage V DC 24
Max. current consumption A 0.5
Max. power consumption W < 12
Protection class II
Electrical data – power supply unit
Nominal input voltage V AC 100 - 240
Frequency Hz 50/60
Nominal output voltage V DC 24
Max. output current A 0.5
General technical data
Dimensions (W x H x D) mm 167 x 231 x 216
Weight kg approx. 4
Duty cycle % 100
Max. theoretical resolution Line pairs / mm (Lp/mm) approx. 16.7
Noise level during scanning dB(A) approx. 45
Network connection
LAN technology Ethernet
Standard IEEE 802.3u
Data rate Mbit/s 100
Connector RJ45
Type of connection Auto MDI-X
Cable type ≥ CAT5
2 Product description
10 Planmeca ProScanner 2.0 User's manual