• Cartridge for Image Plate, Size 2
• Image Plate storage box
• Power supply
• Power cable
• LAN cable RJ45
2.1.2 Accessories
The following items are required for operation of the device, depending on
the application.
Image plates
• Planmeca Imaging Plate, Size 0 (2pcs)
• Planmeca Imaging Plates, Size 1 (2pcs)
• Planmeca Imaging Plate, Size 2 (4pcs)
• Planmeca Imaging Plate, Size 2 (12pcs)
Light protection covers
• Planmeca Light Protection Cover, Size 0 (100 pcs)
• Planmeca Light Protection Cover, Size 1 (100 pcs)
• Planmeca Light Protection Cover, Size 2 (300 pcs)
• Planmeca Light Protection Cover, Size 2 (1000 pcs)
2.1.3 Optional articles
The following optional articles can be used with the unit:
• Wall mounting Plate for ProScanner 2.0
• ProScanner 2.0 Imaging Plate storage box
• Quart test phantom set for Planmeca ProSensor/ProScanner
2.1.4 Consumables
The following materials are consumed during operation of the device and
must be reordered separately.
Cleaning and disinfection
• Image plate cleaning wipes (10 pcs.)
• FD 333 forte wipes for quick-acting disinfection
• FD 350 Classic disinfection wipes
• FD 333 rapid surface disinfection
• FD 322 rapid surface disinfection
• FD 366 rapid disinfectant for sensitive surfaces
• ID 213 instrument disinfection
• ID 212 instrument disinfection
• ID 212 forte instrument disinfection
Light protection covers
For more information, see section "Accessories" on page 9.
2 Product description
User's manual Planmeca ProScanner 2.0 9
To Next Page