Need help?Do you have a question about the Planmeca ProSensor and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Sensor Sizes | Size 1, Size 2 |
| Connection | USB |
| Image Resolution | Up to 20 lp/mm |
| Resolution | Up to 20 lp/mm |
| Compatibility | Planmeca imaging software |
| Dimensions | Varies by size |
| Weight | Varies by size |
Instructions for positioning the patient and applying a protective lead apron before exposure.
Guidance on selecting and connecting the sensor and using the paralleling technique.
Guidance on selecting digital imaging modes and exposure times based on patient and tooth type.
Steps to initiate and perform single intraoral image capture using the Planmeca ProSensor.
Procedure for capturing multiple images into predefined study templates for organized patient records.
Procedure for verifying image quality using the SMPTE test pattern for monitor settings and checks.
Methods for cleaning the exterior surfaces of the Planmeca ProSensor system components.
Guidelines for cleaning and disinfecting the sensors and cables, including precautions.
Instructions for cleaning the sensor holders, referring to the supplied manual.
Procedure for cleaning the Planmeca ProSensor ControlBox with a soft cloth.
Details on sensor type, dimensions, resolution, cable length, and expected service life.
List of compatible client and server operating systems for the Planmeca ProSensor system.
Technical details for Ethernet and USB ControlBoxes, including dimensions, power, and cables.
Specifies required operating and environmental conditions for the Planmeca ProSensor system.
Default exposure values for short and long cone exposures when the unit is switched on.
Preprogrammed exposure values (time/kV/mA) for different exposure regions and modes.
To Next Page