SYMBOLS
2 Planmeca ProSensor
User’s Manual
2 SYMBOLS
Type BF equipment (Standard IEC 60601-1).
Attention, consult accompanying documents
(Standard IEC 60601-1).
The use of accessory equipment not complying with the
equivalent requirements of this equipment may lead to a
reduced level of safety of the resulting system.
Consideration relating to the choice shall include:
• use of the accessory in the Patient Vicinity
• evidence that the safety certification of the accessory has
been performed in accordance to appropriate IEC60601
and/or IEC60601-1-1 harmonized national standard.
Planmeca ProSensor is ETL classified and conforms to
ANSI/AAMI ES60601-1 and is certified to CAN/CSA
C22.2 No. 60601.1:08.
Separate collection for electrical and electronic equipment
according to Directive 2002/96/EC (WEEE)
3 RELATED MANUALS
This manual should be used in conjunction with following
manuals:
• Planmeca ProX User’s manual (10029963)
• Planmeca Romexis User’s manual (10014593)
3143029
ETL CLASSIFIED
To Next Page
Loading...
