CLEANING
16 Planmeca ProSensor
User’s Manual
Do not leave the sensor in the disinfection solution
overnight. The magnetic connector of the sensor cable
should not be soaked.
• Use a new disposable protection cap for every sensor
usage.
• Wipe up the sensor surface with a compress moisten into
a sterile solution.
NOTE The sensor connector can be cleaned using a soft
cloth.
11.3 Sensor holders
For cleaning the sensor holders refer to the manual
supplied with the sensor holder package.
11.4 Planmeca ProSensor ControlBox
The ControlBox can be cleaned with a soft cloth damped
in a mild cleaning solution.
CAUTION Switch off the unit before cleaning.
NOTE Do not disinfect the unit.
To Next Page
Loading...
