Page 9
SECTION II: Specifications
MODEL DESIGNATION
This manual covers the model 510 XL2 machine which is equipped with a 2 amp circuit
breaker for overload protection. U.L. approved for the United States.
POWER REQUIREMENTS
120 Volts A.C.
2.0 Amp circuit breaker
60 HZ
PERFORMANCE
Up to 30 ties per minute
2-1/2 full twists on product tied
DIMENSIONS/WEIGHT
Length: 40
Height: 17.5
Width at top: 14
Width at front feet: 16
Weight: 50 pounds
SPOOL REPLACEMENTS
Recommended Spools:
Part# 313: 1500’ PL/PA 24 gauge single wire 5/32” width
Part# 314: 1500’ PL 24 gauge single wire 5/32” width
To Next Page
Loading...