F200 and F300 User Manual | 15
You can see the status as it downloads, most likely on the
toolbar at the bottom of your screen (depending on how
your computer is set up) – pplus.exe.
If you select this once it is finished your screen may go
black with a message saying “Do you want to allow this
app from an unknown publisher to make changes to your
device?”. Select Yes.
You will then be taken through the installation setup,
including agreement to the Terms and Conditions.
Once this is done, you can access P-Plus from
the icon on your desktop.
8.1.1 Moving P-Plus and your farm data to a new computer
On the old computer
- You will need a USB memory stick to put the backup on.
- Backup your farm data. Go to Help and Backup for
details on how to do this.
- Browse to your USB memory stick so it becomes your
selected backup location.
- Backup your farm data.
On the new computer
- Install P-Plus and request a new licence by contacting us.
- Make a new farm with the same name as the old
computer
- Select Farm and Restore, Use the TOP browse only and
browse to the USB Memory stick
- Find the backup file
- Select the backup file and then select OK in Restore
- This will put your farm data into P-Plus
- Check the data is ok
- Wait for new licence key to arrive to activate your P-Plus
licence. This may take up to 48 hours.
To Next Page
Loading...