F200 and F300 User Manual | 33
13.7 Battery retainer falling out
Check Resolution
The counter screws have not been
tightened sufficiently.
Make sure the center screw is
re-tightened after the battery is
replaced or ensure the battery re-
tainer is properly clicked into place.
13.8 Front panel or membrane problems
Check Resolution
Buttons not clicking or
activating.
First, check that the Platemeter
is calibrated – see section 6
How to Calibrate Your Platem-
eter.
Service – membrane needs
replacing. Send to Platemeters
for service and repair.
13.9 How do I change the formula?
See section 10 Current Dairy Equations
If you require assistance with setting up your Platemeter
or with installing P-Plus Pasture Covers software, please
contact us.
To Next Page
Loading...