Plextor PX-708A - Page 60

Appendix A: PX-708A Specifications
54
PX-708A Installation and Users Manual
Performance Specifications (continued)
Initialization
Time
Time measured from power on until disc is available
to read:
 DVD: < 13 sec. (typical), < 15 sec. (max.)
 CD: < 13 sec. (typical), < 15 sec. (max.)
Access Time Time measured from command phase until bus free
(no disconnect):
 DVD: < 150 msec. (typical), < 180 msec (max.)
 CD: < 100 msec. (typical), < 130 msec (max.)
Sleep Mode Entered after 2 minutes of no access to drive (default
setting)
Wake Mode < 5 sec. (max.) to start drive after sleep
DVD Regional Setting
Compatibility RPC phase-2-compatible
Changing
regional
setting
Max. 5 times
Host Interface
Type ATA/ATAPI-5-compliant
PIO Transfers Modes 0-4
Multiword
DMA
Transfers
Modes 0-2
Ultra DMA
Transfers
Modes 0-2 (Ultra DMA33)
ATAPI
Command Set
Refer to the Plextor ATAPI command manual.
Inquiry string PLEXTOR sp DVDR sp sp sp PX-708A sp sp
(where “sp” is one space)