Appendix A: PX-708A Specifications
PX-708A Installation and Users Manual
55
Front Panel
Eject Eject button; manual emergency eject; software eject.
LED Indicator Yellow when initializing, reading, or ejecting disc.
Green during standby and when Buffer Underrun
Proof Technology or Lossless Linking/Zero Link is
active.
Blinking amber when writing to disc. Blink rate
indicates writing speed:
40 ms interval: Writing DVD at 8X Z-CLV; CD-R at
40X or 32X (CLV area); or CD-RW at 24X (CLV
area).
80 ms interval: Writing DVD at 4X CLV; CD-R at
40X or 32X (CAV area), or 16X CLV; or CD-RW
at 24X (CAV area) or 10X CLV.
150 ms interval: Writing DVD at 2.4X or 2X CLV;
CD-R at 8X or 4X CLV; or CD-RW at 4X CLV.
Disc Loading Auto
Headphone
Jack
Stereo mini-jack for headphones and powered
speakers.
Output voltage (max. volume): 0.8V (rms) ±0.3V
Load impedance: 32 ohms
S/N ratio: Typically 80dB
Total harmonic distortion + noise: Max. 0.08%
(1kHz)
Dynamic range: Typically 75dB (1kHz)
Channel separation: Typically 50dB (1kHz)
Frequency response: 20Hz to 20kHz
(+1/-5dB))
Headphone
Volume
Control
Wheel knob controls audio output level at front panel
headphone jack only.