Measurable data To be able to make use of remote operation,
Plugwise requires your approval to store your data.
You authorise Plugwise to do this by checking off a
checkbox.
Presence detection
sensor
(device settings)
If the presence detection sensor does not appear to
be working as it should, you can readjust its settings.
Press ‘Calibrate’ for this purpose. You can also
switch off the presence detection sensor. Anna will
no longer detects you. Anna’s screen will no longer
switch on automatically. Now you will only be able to
switch on the screen by touching Anna.
Restart
(device settings)
When it is difcult to reach the Smile to restart it,
you can easily do this via the Anna HTML-interface
instead.
Temperature
compensation
Does the temperature in your house not feel the
way you want it to? That could be because Anna is
located at a warmer part of the house. Anna heats
the house according to the temperature measured in
the location where she has been placed. If you want
it to be nice and warm throughout the house, you can
enter a temperature compensation value.
System settings.
14
To Next Page
Loading...