Schedule.
The method used to create a schedule via the HTML-interface is
almost the same as the method used to do this in the app
Via the HTML-interface you click once on the temperature to change
the temperature setting.
When you click on an empty spot in the schedule, you create a new
temperature setting.
You can also make adjustments to the schedule by dragging a
temperature. You do this by placing the cursor on a temperature,
while holding down the left mouse button.
You can change the time by dragging the
dot left or right.
It is possible to specify a different
temperature setting for 15-minute
periods.
You can place up to a maximum of 50
temperature points in the schedule.
16.15
You can only set up a schedule in the
Anna App by entering the time when you
get up, when you go to work, when you
get home and when you go to bed.
6
To Next Page
Loading...
