Boiler settings.
Is Anna using the OpenTherm protocol?
Then you can adjust the maximum boiler
temperature.
Did you not tell Anna what the maximum
boiler temperature is? Then she’ll set it to 60
degrees.
Set the boiler temperature to 60 degrees in a
well-insulated house. The boiler will then heat
for longer, but with a lower ame. Because
your home is well insulated, very little heat is
lost. Your gas consumption will fall.
Set the boiler temperature to 80-85 degrees
in a poorly insulated house. Very little heat
will be lost because your house heats up
quickly. The heaters can be quite a bit warmer
than you are used to. This will mean it will be
warmer, even when the temperature is set
lower.
Anna is automatically set to comfortable
heating. You can create savings with Anna by
selecting a savings mode.
By entering the size of your house and the
type of boiler, you will help Anna to heat your
home more intelligently.
Do you think that Anna is switching on the
heating too early? Then let her know that you
no longer want her to preheat your home and
she will happily oblige.
The boiler protocol (On/Off or OpenTherm) is
the protocol that the Smile reads. When, for
example, you connect the Smile to another
boiler or when the protocol specied here is
not correct, click on ‘Check’ to nd the boiler’s
correct protocol.
18
To Next Page
Loading...