Need help?Do you have a question about the Plusivo DM401B and is the answer not in the manual?
Important guidelines for safe multimeter operation and personal protection.
A general introduction to the Plusivo DM401B Smart Digital Multimeter.
Identifies key components, display elements, and function keys of the multimeter.
Quick reference for SI units, abbreviations, and metric prefixes.
Details operating conditions, power, and general performance specifications.
Specifies accuracy and resolution for DC/AC voltage, current, resistance, etc.
Technical details for capacitance, frequency/duty, and diode/continuity tests.
Technical details for accurate temperature measurements.
How to power on/off and switch between measurement modes.
Instructions for using data hold, flashlight, and backlight features.
Explains indicators for fuses, input jacks, and auto-shutdown.
Step-by-step guide for using the automatic measurement mode.
How to accurately measure AC and DC voltages.
Procedures for measuring resistance and performing continuity tests.
Steps for measuring frequency, duty cycle, and capacitance.
How to perform diode tests and measure temperature.
Procedures for non-contact voltage and live wire detection.
Step-by-step instructions for measuring electrical current.
Explains Ohm's Law and provides examples for circuit analysis.
Details Joule's Law for calculating electrical power consumption.
Covers Kirchhoff's current and voltage laws for complex circuits.
Demonstrates measuring shunt resistors, LED circuits, and battery resistance.
Practical tests for components like potentiometers and transistors.
Presents various multimeter and clamp meter kits available from Plusivo.
Catalog of soldering kits, accessories, and electronic wire kits.
Information on LED kits and other electronic component starter kits.
General| Brand | Plusivo |
|---|---|
| Model | DM401B |
| Category | Multimeter |
| Language | English |
To Next Page
