Page 3/22
1 Intended use and
responsibility of the operator
Thank you for choosing to purchase the “plusoptiX S16”! Plusoptix is the global leader in the
development, production and distribution of medical measuring devices for pediatric Vision
Screening. If you have any further questions after reading this user manual, please do not
hesitate to contact us. The symbols in this user manual have the following meanings:
Please read this user manual before using the “plusoptiX S16” for the first time! It
explains the device’s functions. When the “plusoptiX S16” is switched on,
additional training videos can be accessed by touching the blue “?”.
Warnings and tips are labelled with the Attention! symbol.
The “plusoptiX S16” fulfils the requirements of Medical Devices Directive
2007/47/EEC.
The “plusoptiX S16” fulfils the requirements for a Type B applied part of IEC
60601-1.
Only connect the “plusoptiX S16” to the enclosed GSM36P12-P1J medical
power supply.
The “plusoptiX S16” can be stored and transported at a temperature between
0°C and +50°C (i.e. 32°F to 122°F). A temperature between +10°C and +40°C
(i.e. 50°F to 104°F) with a non-condensing air humidity of 20% to 80% is required
to operate the device.
Disposal
Do not dispose of the “plusoptiX S16” as domestic waste. Please send the
“plusoptiX S16” to Plusoptix (Plusoptix GmbH, Neumeyerstrasse 46, 90411
Nürnberg, Germany) for environmentally friendly recycling. Plusoptix will
reimburse you for the cost of the return.
To Next Page
Loading...
