0.00.50 PMDG 737NGX
TUTORIAL #2
27FEB15 RTM DO NOT DUPLICATE For Simulator Use Only
after using the PLAN feature in the FMC. For me, this was
138600 lbs (62868 kg).
The other settings can all be left on their defaults.
The page should now look like this:
Press the Compute button at the lower right side of the window.
The bottom row of the results that appear is the minimum allowed thrust
for this takeoff and this is what we’ll use.
This should be Flaps 1, a TO2 fixed derate and a 44C assumed
temperature.
Back in the cockpit, press LSK 6R to go to the N1 limit page,
where we’ll begin entering these values in.
Press LSK 4L to select TO-2.
Type 45 and enter it into LSK 1L to enter in the 45 degree C
assumed temperature.
To Next Page
Loading...