HEADER
9
Step 2: Installing the 12-volt adapter
Installing the 12-volt adapter is optional, but
recommended. Insert the small end into the
jack marked “POWER,” located on the back
of the compass, and plug the large end into
your cigarette lighter receptacle.
The photo sensor feature of the PNI
V6000 is operational only when the
12-volt adapter is plugged in or the
optional hardwire kit is installed.
Since cars do not always have constant
power supplied to the lighter receptacle,
you must keep a battery in the PNI
V6000 at all times to allow the unit to
keep memory settings.
A 15-foot hardwire kit is available at
additional cost. See Optional
Accessories.
INSTALLATION
To Next Page
