23
Bearing Mode
Quick method of entering a bearing point
Press until “b_ _ _ °” or the last entered
bearing value appears in line 1.
1. Align your vehicle so the numeric heading to
be stored as a bearing point appears in line 2.
2. Hold to store bearing.
The bearing value will display on line 1. A
ashing arrow corresponding to the stored
bearing value will appear on the compass
rose display whenever the direction of travel
differs from the stored bearing.
To erase bearing point, see long method.
Long method of entering a bearing point
Press to toggle through the program-
ming options until “bEAr” and “SEt” display
on screen.
1. Press .
Either “_ _ _ °” or the last entered bearing
value appears in line 1 with the 100s digit
ashing.
If is held now, the last entered
bearing point is erased.
2. Press to enter a bearing point.
100s digit advances. Continue pressing
until
correct digit displays.
PROGRAMMING AND OPERATION
To Next Page
Loading...
