24
3. Press .
To store selected digit in 100s position
and 10s digit ashes. Press
until
correct digit displays then press
to store. The 1s digit now ashes. Press
to advance digit until correct one
displays. Press
to store then press
to exit.
The bearing value will display on line 1.
In bearing display mode, a ashing arrow
representing the stored bearing value will
appear on the compass rose if the direction
of travel differs from the stored bearing.
To view a stored bearing
Press
in normal display mode to toggle
between the various display options until the
bearing point value appears.
PROGRAMMING AND OPERATION
To Next Page
Loading...
