16
Calibration Mode
Calibration is the process whereby the PNI
V6000 separates the earth’s magnetic eld
from other magnetic elds. Without calibra-
tion, the unit thinks the entire magnetic eld
it is reading is from the earth and therefore
displays inaccurate compass readings.
Calibration Guidelines
1. The PNI V6000 needs to be calibrated (1)
when used for the rst time in a vehicle,
(2) when moved to a different location
in the same vehicle, (3) when moved to a
different vehicle, or (4) when the battery
is removed if neither the 12-volt adapter
nor the hardwire kit is installed.
2. The PNI V6000 requires recalibration
when there has been a change to your
vehicle, such as the installation of a new
stereo or when the degree symbol on line
2 ashes continuously.
3. If you intend to operate your PNI V6000
with the temperature tether installed,
then it should be calibrated after tether
installation has been completed.
4. If you drive with your headlights and
stereo on, turn these on prior to
calibration.
PROGRAMMING AND OPERATION
To Next Page
Loading...
