15
5. Hold the base plate where the suction
cups are attached in one hand and the
shaped compass holder in the other.
Rotating the pivot point as little as
possible, adjust the bracket for the correct
angle.
6. Press the suction cup base rmly against
the windshield. If necessary, apply a
thin layer of petroleum jelly to improve
suction cup grip.
Repeated turning of the bracket at the
pivot point will break the teeth in the
pivot housing, causing the bracket to
not be able to maintain the mounting
angle.
Do not leave the PNI V6000 in a parked
vehicle that is likely to be exposed to
extremely hot or cold temperatures.
INSTALLATION
To Next Page
Loading...
