HEADER
12
Optional Accessories.
Step 4: Mounting the unit
• Choose a place on the windshield that
will not obstruct the driver’s view and is
within reach so the buttons are easy to
push. Make sure the windshield surface
is clean. Once installed, the face of the
compass must be pointing toward the
rear of the vehicle.
• The unit can be tilted up or down a
maximum of 20° from road level. If tilted
more than ±20°, the heading information
after calibration may not be accurate.
The selected angle from road level must
stay xed after calibration for the heading
to remain accurate (see illustration on
page 13).
• The accuracy of the PNI V6000 will be
diminished by a strong magnetic eld,
such as that found in proximity to an
audio speaker. It is recommended that
the unit be mounted 5 or more inches
away from stereo speakers.
INSTALLATION
To Next Page
