PNI V6000 - Barometer Mode

25
Barometer mode
The PNI V6000 contains a pressure sensor
capable of detecting pressure changes caused
by weather conditions, altitude changes, and
cabin pressure. The barometer reading
reports the same type of value that is reported
by most weather reports, namely sea-level
pressure.
Press in normal display mode to toggle
between the various display options until the
“BAROMETER” indicator is on. Barometric
pressure is updated every second and appears
numerically on the display with an up/down
trend arrow. The trend arrow indicates
whether the pressure has increased or
decreased over the last hour. The unit stores
pressure data continuously, even when off.
To select between “mb” (millibars) or “inHg”
(inches of mercury)
Press to toggle through the program-
ming options until “bAro” and “SEt” display
on screen.
1. Press to toggle between the “mb” or
“inHg” indicators
When the scale you want is ashing, press
to select and exit to normal display
mode.
PROGRAMMING AND OPERATION