20
Continue to press until the correct
number displays.
7. Press .
To select the 1s digit, which stops ashing.
Press to exit to normal display mode.
To select between true or magnetic north:
Note: The proper declination angle must rst
be stored as indicated in the previous sec-
tion.
1. Press to toggle through the pro-
gramming options until “dECL” and
“SEt” display on screen.
2. Press to select between true or
magnetic north.
The declination icon in the upper left
corner appears to indicate true north or
disappears to indicate magnetic north.
PROGRAMMING AND OPERATION
To Next Page
Loading...
