3. Assemble the bracket and the arm stand.
4. Clean the windshield where you will
apply the suction cup. Attach the suction
cup firmly to the windshield and press
the locking tab to secure the cup.
5. Connect the other end of the car charger to
the cigarette lighter in the car to power and
charge your device.
CAUTION:
z When bending the arm, use both hands to adjust gently. Never use force.
z To retain adhesion of the car holder’s suction cup, detach and then re-attach the suction
cup at least once a month.
10
To Next Page
Loading...