Getting Started 15
NOTE The indication can be switched off in Setings > Appear-
ance> LED Indication section.
If the Device is on when you connect the cable to PC, a
dialog window asking to select action – PC link or Charge—
will appear.
POWER MANAGEMENT
To turn on the Device, press On/Off button until startup
logo will appear. When the Device is ready to operate, an
image will be changed to Main menu or last opened book,
depending on settings (Settings > Personalize > Open at
startup).
To turn off the Device, press On/Off button continuously
until the Device goes off. In addition, you can set auto-
matic key lock or power off: go to Settings > Saving Power>
Power off after or Lock Device after respectively, and set the
To Next Page
Loading...
