Settings
In this chapter you will learn how congure the interface
and software features of the Device for the most
comfortable usage. Select Settings Main menu section
to congure the Device. All changes will be applied after
exiting the section.
If you will encounter any problems with new settings, you
will be able to start the Device in safe mode with factory
defaults. To start in a safe mode, press and hold key
during the Device boot.
PERSONALIZE
Open at Startup last opened book or main menu.
Boot Logo – image displayed during the Device starts.
Logos are stored in system/logo internal storage folder, so
you can copy an image you’d like to be displayed during
startup.
To Next Page
Loading...
