Settings 77
NETWORK
In this section you can set parameters needed for network
connection.
Network access — on or off. After network access activation,
the following settings appear:
• Auto connection on or off.
• Connection to hidden networks — Read more in the
Connecting to the Internet section of this manual
• Available Networks — a list of available networks.
Choose one of them and you’ll see parameters of this
connection: Network name (SSID), signal strength, security,
IP-address, network mask, main gateway, DNS.
NOTE If Scanning is displayed instead of Available Networks, it
means that Device is searching for available networks.
To Next Page
Loading...
