Firmware Update 93
2. Click the Support button on top menu. Select
hardware model of your Device
3. Download the Firmware to your PC
4. Unpack the content of the archive, le SWUPDATE.
BIN and copy it to the root folder of MicroSD-Card or in-
ternal Device storage
5. Switch off the Device by pressing button On/Off
6. Switch on the Device by pressing On/Off
7. During boot press and hold both and but-
tons simultaneously until the message Firmware update…
is displayed on the screen
8. Follow the on-screen instructions in pictures:
Connect USB cable to the Device and Press menu key.
NOTE You can check your Firmware version in Main menu > Set-
tings > About Device > Software > Firmware Version. If the rmware
le is located in the Device’s root folder, it will have a higher prior-
ity in comparison with the le stored on the SD card during the
update process.
To Next Page
Loading...
