CelloTrack LTE Plus Overview
CelloTrack XT LTE Overview.docx Page 11 of 40
Copyright © 2020 by Pointer Telocation, Ltd.
3 The CelloTrack LTE Plus Variants
3.1 The CelloTrack Standalone
The regular CelloTrack unit is designed for unpowered assets. It is
ideal for trailers, containers, trains and other high value mobile
assets.
The unit includes a 6-pin connector for battery charging,
programming, and two general purpose I/Os which can function as
dry contact inputs, threshold based input, analog input, frequency
counter or open collector output (relay driver). The connector is
covered by a rubber cover for dust and water protection (IP67).
The CelloTrack LTE with XT battery provides an asset tracking
solution for environments of temperature range -30°C to +70°C and
charging temperature range of -20°C to +60°C. The CelloTrack LTE
support up to 20 months of single GPS readings and GPRS
transmissions per day, utilizing a 5.3 Ah rechargeable Li-Poly battery.
The unit is charged via a dedicated charger from a standard electric wall outlet (110 /
230 V).
3.2 The CelloTrack Power
The CelloTrack Power unit is designed specifically for
assets which have an occasional power connection, such
as trailers. The unit charges its battery when the power is
connected and uses its battery and the advanced power
management algorithm to maintain tracking when the
power is disconnected.
The unit includes a pigtail harness for battery charging,
programming and two general purpose I/Os which can
function as dry contact inputs, threshold based input,
analog input, frequency counter or open collector output
(relay driver). The unit is charged via the asset (trailer)
power supply (12 / 24 V).
When not connected to power supply, the unit supports
the same temperature range and life time of the CelloTrack Standalone.
When connected to external power, the CelloTrack power supports temperature range
of -30°C to +75°C.
3.3 The CelloTrack Lighter
The CelloTrack Lighter unit is designed especially for applications where power is
connected only on “ignition on” and minimum installation and maintenance is required.
The CelloTrack Lighter is shipped as a kit comprised of the CelloTrack Power and the
Lighter Harness. The Lighter Harness is terminated with a connector which fits a
vehicle’s standard cigarette lighter socket.
This setup allows the unit to be installed in the driver’s cabin with a fast and simple
connection to the vehicle power. The unit charges its battery when the power is
connected and uses its battery and the advanced power management algorithms to
maintain tracking when vehicle power is disconnected.
To Next Page
Loading...
General