CelloTrack LTE Plus Overview
CelloTrack XT LTE Overview.docx Page 28 of 40
Copyright © 2020 by Pointer Telocation, Ltd.
opens a distress session, sends a “start motion” message, and returns to Hibernation.
When no further motion is detected, the unit opens a distress session, sends a “stop
motion” message, and returns to Hibernation. This is known as start-stop reporting
during Hibernation.
5.3 Tracking State
By default, the unit is configured to enter the Tracking state when motion is detected
and to exit Tracking when motion ends. This is done to conserve battery power.
In the Tracking state the unit does the following:
Powers up its GNSS module.
Powers up its GSM module.
Sends regular location updates to the server.
Provides full CelloTrack functionality, including: periodical and distance events,
geo-fence related events, speed related events, and maintenance events.
Activates its interfaces.
In the Tracking state, the unit provides the best tracking and communication features,
generates time/location updates (known as time events), and behaves as a standard
fleet management oriented unit. This is the most energy-intensive state.
detected
To Next Page
Loading...
General