POL-EKO RT 2014 - Roaming; Operation of the Device

Instruction manual RT 2014
POL-EKO-APARATURA sp.j. • ul. Kokoszycka 172 C • 44-300 Wodzisław Śl. • tel./fax +48/ 32 453 91 70 • e-mail info@pol-eko.com.pl
11
All devices in WIFI version should be first configured in AVIA software in order to be connected to the
local network. You can find more information in the AVIA user manual.
Lack of or too weak signal of any mobile network in the installation place of the device as well
as inability to use the text message option is not a product defect and cannot be the basis for
any claims directed to the manufacturer of the RT 2014 - the company POL-EKO-
APPARATURA.
5.2.5 Roaming
In a cross-border areas it may happens that the device will be communicated to the foreign operator
networks (using roaming). It will cause higher costs for sending text message / making calls. The letter
‘R’ instead of the range icon, informs about operation of the device in roaming. To prevent your device
from foreign operators it’s recommended to disable roaming by contacting the GSM network operator.
Likewise, when roaming is off, the device operating in the border areas of the domestic operator signal
may be too weak to reliably operation. In this case, we it’s recommended that you enable roaming
services in GSM network.
The device does not distinguish domestic and abroad roaming. For boarder areas the manufacturer is
not responsible for not distinguishing of domestic and foreign roaming.
6 OPERATION OF THE DEVICE
To startup push and hold button for 4 second (till the main view appears). Enabling and disabling
RT 2014 signaled by an is audible signal.
To enter menu, press button. On display the following options will show:
• Standby – switching off the unit.
• Ac. balance – option available after set parameter USSD in AVIA software - program
it activates USSD code (mostly used to check account's balance) – reading can last up to 1
minute,
• Upgrade – software actualization (see point 6.2),
• Restart – restart of the device, resets date and time,
• Clock – setting date and time,
• Info – information of the version, software.
To exit the menu, press .
Setting the date and time occurs while connecting with PC application and selecting "Send to device".
In WIFI version the time setting takes place during the connection to the AVIA server.
In the devices equipped with more sensors, switching between them takes place by pressing .
Adjusting the operating parameters of data logger (for example: emergency situations
telephones numbers) can be set only in AVIA software.