TRANSMISSION
8.4
7. Remove the cotter key and bushings that secure
the auxiliary brake pedal to the frame.
Auxiliary Brake Pedal
8. Use the Roll Pin Removal Tool (PN 2872608)to
remove the roll pin from the front prop shaft.
Remove the front propshaft.
Remove Roll Pin
9. Remove PVT outer cover, both drive and driven
clutch, and inner PVT cover (refer to Clutch
Removal in Chapter 6).
10. Remove rear drive shafts. See Page Chapter 7.
Pull outward to remove
from transmission
11. Disconnect the sway bar (A) from both sides.
Remove right side upper and lower control arms
(B). Refer to Chapter 7 for more details.
12. Remove left side shock absorber (C).
A
B
C
Frame
13. Remove both lower transmission mounting bolts
from each side.
Lower Mounting Bolts
14. Remove the two bolts that secure the rear storage
compartment.
15. Remove all 8 bolts attaching the stabilizer support
bracket, and remove support.
To Next Page
Loading...
