GENERAL INFORMATION
1.2
MODEL IDENTIFICATION
The machine model number must be used with any correspondence regarding warranty or service.
Machine Model Number Identification
Year Designation
Basic Chassis
Designation Engine Designation
A05MH50AA
Model Option
ENGINE DESIGNATION NUMBERS
42 EH42PLE Single, L/C, SOHC 4 Stroke, Electric Start...............
50 EH50PLE Single, L/C, SOHC 4 Stroke, Electric Start...............
VIN IDENTIFICATION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
4XA MH
50A* 5P0 00 000
Vehicle Descriptor
Vehicle Identifier
Powertrain
Engine
Emissions
Model
Year
Plant No.
Individual Serial No.
Body Style
Check Digit
World Mfg. ID
* This could be either
a number or a letter
Whenever corresponding about an engine, be sure to refer to the engine model number and serial number. This
information can be found on the sticker applied to the recoil housing on the right side of engine.(A) An additional
number is stamped on the center top of crankcase beneath the cylinder coolant elbow.
MACHINE MODEL NUMBER AND SERIAL NUMBER LOCATION
Engine model number is on recoil housing (A). The
machine model number and serial number are
important for vehicle identification. The machine
serial number is stamped on the lower left side of
the frame tube.(B)
TRANSMISSION I.D. NUMBER
LOCA
TION
A
B
Front
The transmission I.D. number is lo-
cated on top of the transmission
snorkel, right side of machine.
To Next Page
Loading...
Need help?
General
