ELECTRICAL
10.18
COMPONENTS OF EH42/50PLE / 240 WATT ALTERNATOR
(DC/CDI
IGNITION)
CDI Box
Resistor
Cap
Stator
Plate
Ignition
Coil
Meter
NOTE: CDI boxes may look the same but have
different internal circuitry. Be sure to always use
the correct CDI box part number.
Battery Charging
Coils
10.5k Ω
Pulse Coil (Trigger)
Air Gap: .016-.030″
(.4 - .75 mm)
Flywheel
Refer To Wiring Diagrams For
Specified Stator Coil Resistance
Check coil mount for good
ground to engine (0-.2 )
Ω
Magnetic Switch
To Next Page
Loading...
