111
MAINTENANCE
Supporting Utility Vehicle On Jack
Stands
Procedure
For service work under the utility vehicle, or to remove the
wheels, always support the utility vehicle with jack stands or
blocks of adequate capacity for weight of utility vehicle. See
specifications page 125.
Always park the utility vehicle on a flat level surface.Put gear
selector in Park, stop the engine and exit the vehicle.
If removing wheel(s), loosen the wheel nuts slightly before
lifting the vehicle.
WARNING!
Avoid Injury Or Death.
Instructions are necessary before operating or servicing machine.
Read and understand the Operator’s Manual, Operator’s Handbook
(if equipped) and signs (decals) on machine. Follow warnings and
instructions in the manuals when performing repairs, adjustments or
service. Check for correct function after adjustments, repairs or
service. Untrained operators and failure to follow instructions can
cause injury or death.
Place the jack stands under
the frame at the front of the
utility vehicle (both sides).
Tip: When lifting the utility vehi-
cle, place jack under front
frame.
Place the jack stands under
the rear frame of the utility
vehicle (both sides).
Tip: When lifting the utility vehi-
cle, place jack under rear
frame.
To Next Page
Loading...
Need help?
General
