124
MAINTENANCE
Removal from Storage
1. Charge the battery if necessary. Install it in the vehicle.
2. Fill the fuel tank with fuel.
3. Check all the points listed in the Daily Pre-Ride Inspection
section on page 35.
4. Lubricate at the intervals outlined in the Periodic Mainte-
nance Chart beginning on page 78.
Transporting the BRUTUS
Follow these procedures when transporting the vehicle.
1. Apply the brakes.
2. Stop the engine.
3. Place the transmission in PARK.
4. Secure the fuel cap, oil cap and seat.
5. Always tie the frame of the BRUTUS to the transporting
unit securely with suitable straps or chains. Do not attach
tie straps to the front A-arm bolt pockets.
6. Remove the key to prevent loss during transporting.
To Next Page
Loading...
Need help?
General
