35
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating increases the risk of an accident.
Always inspect the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation. 24, 101
Brake fluid Ensure proper level. 101
Front and Rear suspension Inspect, lubricate if necessary. 119
Seat Belts Check length of belt for damage, check latches for proper operation. 26
ROPS/OPS Check condition of ROPS/OPS and mounting hardware. 26
Steering Ensure free operation. 103
Tires/wheels/fasteners Inspect condition and pressure. Inspect, ensure fastener tightness. 112
Safety Signs (Decals) Check for damaged or missing signs (decals). Replace any signs that are damaged or missing.
Frame nuts, bolts, fasteners Inspect, ensure tightness. -
Fuel and oil Ensure proper levels. 39, 88
Coolant level Ensure proper level. 92
Coolant hoses Inspect for leaks. -
Travel Control Pedal Ensure proper operation. 24
Indicator lights/switches Ensure operation. 19
Air filter, pre-filter Inspect, clean and replace as needed. 95
PTO (If Equipped) Inspect splines, guards, shields and hardware, ensure tightness, replace damaged parts. 51
Brake light/tail lamp /Headlamp Check operation, apply POLARIS dielectric grease when lamp is replaced. 102, 114
Heater/Air Conditioning Filter Clean and replace filter as needed during heating and cooling season. 106
To Next Page
Loading...
Need help?
General
