Polaris BRUTUS Owner's Manual

64
OPERATION
Filling And Emptying The Bucket
Filling
Lower the attachment arm all the way (Item A) and tilt the
bucket forward (Item D) until the cutting edge is on the
ground. Drive slowly forward to push the bucket slightly into
the material.
Raise the attachment arm (Item B) and tilt the bucket back-
ward (Item C).
WARNING!
Avoid serious Injury Or Death
Load, unload and turn on flat level ground. Do not exceed vehicle
load capacity shown on sign (decal) in cargo box. Failure to obey
warnings can cause vehicle rollover and can cause serious injury or
death.
Drive backward away from the material.
Emptying
Keep the bucket low when moving to the area where you want
to dump the material.
Move the machine slowly to the dump area.
While raising the attachment arm (Item B), tilt the bucket for-
ward (Item D) to keep it level and help prevent material from
falling off the back of the bucket.
Tilt the bucket all the way forward (Item D) to empty the
bucket.
A
B
C
D
A
B
C
D
A
B
C
D

Polaris BRUTUS Specifications

General

Brand	Polaris
Model	BRUTUS
Category	Utility Vehicle
Language	English