80
MAINTENANCE
PTO Interlock System (Model HDPTO)
The utility vehicle is equipped with a PTO Interlock System. The operator must be seated in
the operators seat before the PTO can be engaged.
Inspection
To check the function of the PTO Interlock System:
1. With the operator in the operator seat, the gear selector lever in PARK, the engine
running and the PTO engaged; Raise up on the operator’s seat (without exiting the utility
vehicle) to take all weight of the operator’s seat. The PTO system must disengage.
Monitor the dash panel to see that the PTO indicator turns OFF.
2. With the operator in the operator seat, the gear selector lever in PARK, the engine
running, raise off of the operator’s seat, then activate the PTO system. The PTO must not
engage.
3. If the PTO system does not function as described, stop using the utility vehicle and see
your dealer for service.
To Next Page
Loading...
Need help?
General
