Polaris BRUTUS User Manual

85
MAINTENANCE
Gearcases
Front Gearcase
Always check and change the front gearcase oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 73. Maintain the oil level even with the bottom thread
of the fill plug hole.
Refer to the Gearcase Specifications Chart on page 84 for recommended lubricants,
capacities and torque specifications. See page 119 for the part numbers of POLARIS
products.
Oil Check
The front gearcase fill plug is located on the right side of
the front gearcase.
1. Position the vehicle on a level surface.
2. Remove the fill plug. Check the oil level.
3. Add the recommended oil as needed.
4. Reinstall the fill plug. Torque to specification.
Oil Change
1. Support the vehicle securely on jack stands.
2. Remove the fill plug.
3. Place a drain pan under the drain plug on the bottom
of the gearcase.
4. Remove the drain plug. Allow the oil to drain
completely.
5. Clean and reinstall the drain plug. Torque to
specification.
6. Add the recommended oil.
7. Reinstall the fill plug. Torque to specification.
8. Check for leaks. Dispose of used oil properly.
Fill Plug
Drain Plug

Polaris BRUTUS Specifications

General

Brand	Polaris
Model	BRUTUS
Category	Utility Vehicle
Language	English